GetAirlineCare

Do You Need Washers On Skateboard Wheels

It is not necessary to use washers on skateboard wheels, but they can serve a few purposes. Washers can be placed between the wheel and the truck to provide a small amount of spacing and allow the wheel to spin more freely. This can be useful for certain skateboarding tricks or for riding on rough surfaces.

Washers can also be used to adjust the fit of the wheel on the truck. If the wheel is too loose, adding a washer or two can help to tighten it up. Similarly, if the wheel is too tight, removing a washer or two can help to loosen it up.

It is important to note that using washers can affect the performance of the skateboard, so it is a good idea to experiment with different configurations to find the setup that works best for you.

Negatives of Using Washers on Skateboard Wheels

  • Reduced contact between wheel and truck: Using washers can reduce the amount of contact between the wheel and the truck, which can affect the stability and control of the skateboard.
  • Increased weight: Using washers can increase the weight of the skateboard, which can make it feel less agile and can make it more difficult to perform certain tricks.
  • Reduced responsiveness: If the washers are too thick, they can create too much spacing between the wheel and the truck, causing the skateboard to feel less responsive.
  • Decreased stability: Using washers can reduce the amount of contact between the wheel and the truck, which can lead to decreased stability on the skateboard.
  • Weaker pop: If the washers are too thick, they can create too much spacing between the wheel and the truck, which can weaken the “pop” of the skateboard when performing tricks such as ollies.
  • Decreased control: Using too many washers or washers that are too thick can also reduce the amount of control you have over the skateboard, making it harder to make precise turns or to maintain balance.
  • Reduced responsiveness: Washers can also affect the responsiveness of the skateboard, making it feel less reactive to your movements and inputs.

It is important to keep these potential drawbacks in mind when deciding whether or not to use washers on your skateboard wheels. In general, it is a good idea to use the minimum number of washers needed to achieve the desired fit and spacing, and to choose lightweight materials whenever possible.

See also  How To Protect The Bottom Of Your Skateboard

Positives of Using Washers on Skateboard Wheels

  • Improved wheel spacing: Washers can be placed between the wheel and the truck to provide a small amount of spacing and allow the wheel to spin more freely. This can be useful for certain skateboarding tricks or for riding on rough surfaces.
  • Adjustable fit: Washers can also be used to adjust the fit of the wheel on the truck. If the wheel is too loose, adding a washer or two can help to tighten it up. Similarly, if the wheel is too tight, removing a washer or two can help to loosen it up.
  • Customization: Using washers can also allow you to customize the fit and feel of your skateboard to better suit your personal preferences and riding style.
  • Improved stability: In some cases, using washers can help to improve the stability of the skateboard by adjusting the fit of the wheels on the truck.
  • Enhanced performance: Depending on your needs and goals, using washers may allow you to optimize the performance of your skateboard for specific tricks or riding styles.

Overall, the positives of using washers on skateboard wheels depend on your specific needs and goals. In general, washers can be a useful tool for adjusting the fit and spacing of your wheels and for customizing the performance of your skateboard. However, it is important to be mindful of the potential drawbacks and to experiment with different configurations to find the setup that works best for you.

FAQ

Do skateboard wheels come with washers?

It is not common for skateboard wheels to come with washers. In most cases, skateboard wheels are sold without washers and it is up to the rider to decide whether or not to use them.

That being said, it is possible that some skateboard wheels may come with washers included, particularly if they are designed for a specific purpose or use case that requires washers. For example, some wheels may be designed for use with longboard trucks, which have a different mounting system and may require washers to achieve the proper fit and spacing.

In general, it is a good idea to check the packaging or documentation that comes with your skateboard wheels to see if they include any washers or other hardware. If not, you can purchase washers separately or use washers that you already have on hand.

Why do skateboard trucks have washers?

Skateboard trucks do not typically come with washers installed. Instead, washers are often used in conjunction with skateboard trucks as a way to adjust the fit and spacing of the wheels.

See also  Can You Make Your Own Skateboard

There are a few different reasons why someone might choose to use washers with their skateboard trucks:

  • To improve the fit of the wheels: Washers can be used to fine-tune the fit of the wheels on the trucks. If the wheels are too loose, adding a washer or two can help to tighten them up. If the wheels are too tight, removing a washer or two can help to loosen them up.
  • To provide additional spacing: Washers can also be used to provide a small amount of spacing between the wheel and the truck, which can allow the wheel to spin more freely and can be useful for certain skateboarding tricks or for riding on rough surfaces.
  • To customize the feel of the skateboard: Using washers can allow you to customize the fit and feel of your skateboard to better suit your personal preferences and riding style.

Overall, the decision to use washers with skateboard trucks is a personal one and depends on your specific needs and goals. It is a good idea to experiment with different configurations to find the setup that works best for you.

Do you need spacers and washers for skateboard bearings?

Spacers and washers are not typically necessary for skateboard bearings. Bearings are designed to fit snugly in the wheel hub, and adding spacers or washers can actually cause problems by increasing the spacing between the bearings and the wheel hub.

That being said, some skateboarders may choose to use spacers or washers in certain situations. For example, spacers can be used to help align the bearings in the wheel hub, particularly if the wheel hub is slightly out of round or has a slightly irregular shape. In this case, using spacers can help to improve the fit of the bearings and reduce friction, which can improve the performance of the skateboard.

Similarly, washers can be used to adjust the spacing between the bearings and the wheel hub. However, it is important to be careful when using washers in this way, as using too many or using washers that are too thick can cause problems by creating too much spacing between the bearings and the wheel hub.

In general, it is a good idea to use the minimum number of spacers and washers needed to achieve the desired fit and spacing, and to choose lightweight materials whenever possible. It is also a good idea to follow the manufacturer’s recommendations for installing bearings, as these will provide the best guidance on whether or not to use spacers or washers.

See also  How Tight Should Skateboard Wheels Be

How many speed washers do you need on a skateboard?

Speed washers are thin, lightweight washers that are used to adjust the fit of the wheels on the trucks. They are called “speed” washers because they are designed to reduce friction and increase the speed of the skateboard by allowing the wheels to spin more freely.

The number of speed washers that you need on a skateboard will depend on your personal preferences and the specific needs of your skateboard. In general, it is a good idea to use the minimum number of speed washers needed to achieve the desired fit and spacing. Using too many speed washers can create too much spacing between the wheel and the truck, which can affect the stability and control of the skateboard.

To determine the right number of speed washers for your skateboard, you will need to consider a few factors:

  • The size and style of your trucks: Different trucks may require different numbers of speed washers to achieve the desired fit and spacing.
  • The size and style of your wheels: Larger or wider wheels may require more speed washers to achieve the desired fit, while smaller or narrower wheels may require fewer speed washers.
  • Your personal preferences: Ultimately, the number of speed washers that you use on your skateboard will depend on your personal preferences and the feel that you are looking for. Experimenting with different configurations can help you find the setup that works best for you.

In general, it is a good idea to start with a small number of speed washers and gradually add more as needed until you find the right fit for your skateboard.

Skate PSA: Why you should use bearing spacers (and truck washers) on your skateboard

Conclusion

In conclusion, washers can be a useful tool for adjusting the fit and spacing of skateboard wheels and for customizing the performance of a skateboard. However, it is important to be mindful of the potential negatives of using washers, such as reduced stability, weaker pop, increased weight, and reduced responsiveness. The right number and thickness of washers will depend on your specific needs and goals, and it is a good idea to experiment with different configurations to find the setup that works best for you. In general, it is a good idea to use the minimum number of washers needed to achieve the desired fit and spacing, and to choose lightweight materials whenever possible.

Leave a Comment