The main difference between a lipslide and a boardslide is the position of the skateboard on the rail or ledge. In a lipslide, the front trucks of the skateboard are on the rail or ledge and the back trucks are hanging off, while in a boardslide, the back trucks of the skateboard are on the rail or ledge and the front trucks are hanging off.
Another difference between the two tricks is the position of the skateboarder’s feet on the board. In a lipslide, the skateboarder stands on the board with their back foot on the tail of the board and their front foot on the nose, while in a boardslide, the skateboarder stands on the board with their front foot on the tail of the board and their back foot on the nose.
Both tricks can be performed on a variety of obstacles, including handrails, ledges, and ramps, and they can be performed in different variations, such as 50-50, crooked, or fakie. However, they each have their own unique set of challenges and require a different set of skills and techniques to execute properly.
Overall, the main difference between a lipslide and a boardslide is the position of the skateboard and the skateboarder’s feet on the board, as well as the balance and weight distribution required to perform the trick successfully.
What is Lipslide?
A lipslide is a skateboarding trick that involves sliding the board across an obstacle, such as a rail or a ledge, with the front trucks (the part of the skateboard that the front wheels are attached to) on the rail or ledge and the back trucks hanging off. The skateboarder stands on the board with their back foot on the tail of the board and their front foot on the nose, and they use their weight and balance to keep the board in place as they slide across the obstacle.
Lipslides can be performed on a variety of obstacles, including handrails, ledges, and ramps, and they can be performed in different variations, such as 50-50 (where the skateboarder balances the board evenly on the rail or ledge), crooked (where the board is tilted to one side), or fakie (where the skateboarder approaches the obstacle backwards and performs the trick in the opposite direction).
Lipslides are challenging tricks that require a lot of practice and balance to execute properly. However, they can be a lot of fun to learn and can be a great way to add some variety to your skateboarding repertoire. Whether you’re a beginner or an experienced skater, learning how to perform lipslides can be a rewarding and exciting experience.
What is boardslide?
A boardslide is a skateboarding trick that involves sliding the board across an obstacle, such as a rail or a ledge, with the back trucks (the part of the skateboard that the back wheels are attached to) on the rail or ledge and the front trucks hanging off. The skateboarder stands on the board with their front foot on the tail of the board and their back foot on the nose, and they use their weight and balance to keep the board in place as they slide across the obstacle.
Boardslides can be performed on a variety of obstacles, including handrails, ledges, and ramps, and they can be performed in different variations, such as 50-50 (where the skateboarder balances the board evenly on the rail or ledge), crooked (where the board is tilted to one side), or fakie (where the skateboarder approaches the obstacle backwards and performs the trick in the opposite direction).
Boardslides are challenging tricks that require a lot of practice and balance to execute properly. However, they can be a lot of fun to learn and can be a great way to add some variety to your skateboarding repertoire. Whether you’re a beginner or an experienced skater, learning how to perform boardslides can be a rewarding and exciting experience.
Which is easier to do lipslide or boardslide
It’s difficult to say definitively which trick is easier to do, as it can depend on a number of factors, including the individual skater’s skill level, balance, and coordination, as well as the specific obstacle being skated and the conditions of the skating surface. Some skaters may find lipslides easier to perform, while others may find boardslides easier.
Both lipslides and boardslides require a good sense of balance and control, as well as proper technique and foot placement on the board. Both tricks can be challenging to execute, especially for beginner skaters, and they may require a lot of practice and patience to master.
If you’re a beginner skater and you’re trying to decide which trick to focus on first, it might be helpful to start with the trick that feels more comfortable and natural to you. You can also try practicing both tricks slowly and progressively, starting with simpler variations and gradually working your way up to more advanced variations. With practice and persistence, you’ll be able to improve your skills and eventually be able to do both tricks confidently.
How to Do a Lipslide step by step
Here’s a step-by-step guide on how to do a lipslide:
- Find an obstacle to lipslide on, such as a handrail or a ledge. Make sure the obstacle is smooth and free of any rough spots or debris that could cause you to lose your balance or catch your wheels.
- Approach the obstacle with your back foot on the tail of the board and your front foot on the nose. You’ll want to approach the obstacle at a moderate speed, not too fast or too slow.
- As you approach the obstacle, start to lean your weight onto your front foot, shifting your balance towards the front of the board. This will help you lift the back trucks off the ground and onto the rail or ledge.
- Once the back trucks are on the rail or ledge, use your front foot to push the board up onto the rail or ledge. At the same time, use your back foot to lift the nose of the board up and over the rail or ledge.
- As the board comes to rest on the rail or ledge, shift your weight onto your back foot and use your front foot to balance the board. You should be standing on the board with your back foot on the tail and your front foot on the nose.
- To slide the board along the rail or ledge, use your back foot to push the board forward and your front foot to balance and steer the board. Keep your weight evenly distributed between your feet to maintain balance and control.
- As you near the end of the rail or ledge, start to shift your weight back towards the tail of the board and use your back foot to push the board off the rail or ledge. At the same time, use your front foot to lift the nose of the board up and over the rail or ledge.
- Land back on your wheels and ride away smoothly.
Remember to practice this trick slowly and progressively at first, and always wear protective gear to minimize the risk of injury. With practice and patience, you’ll be able to master the lipslide in no time!
How to Do a boardslide step by step
Here’s a step-by-step guide on how to do a boardslide:
- Find an obstacle to boardslide on, such as a handrail or a ledge. Make sure the obstacle is smooth and free of any rough spots or debris that could cause you to lose your balance or catch your wheels.
- Approach the obstacle with your front foot on the tail of the board and your back foot on the nose. You’ll want to approach the obstacle at a moderate speed, not too fast or too slow.
- As you approach the obstacle, start to lean your weight onto your back foot, shifting your balance towards the back of the board. This will help you lift the front trucks off the ground and onto the rail or ledge.
- Once the front trucks are on the rail or ledge, use your back foot to push the board up onto the rail or ledge. At the same time, use your front foot to lift the tail of the board up and over the rail or ledge.
- As the board comes to rest on the rail or ledge, shift your weight onto your front foot and use your back foot to balance the board. You should be standing on the board with your front foot on the tail and your back foot on the nose.
- To slide the board along the rail or ledge, use your front foot to push the board forward and your back foot to balance and steer the board. Keep your weight evenly distributed between your feet to maintain balance and control.
- As you near the end of the rail or ledge, start to shift your weight back towards the tail of the board and use your front foot to push the board off the rail or ledge. At the same time, use your back foot to lift the tail of the board up and over the rail or ledge.
- Land back on your wheels and ride away smoothly.
Remember to practice this trick slowly and progressively at first, and always wear protective gear to minimize the risk of injury. With practice and patience, you’ll be able to master the boardslide in no time!
Types of lipslide
There are several different types of lipslides that skateboarders can perform, each with its own set of challenges and techniques. Here are a few common types of lipslides:
- 50-50 Lipslide: This is the most basic type of lipslide, where the skateboard is balanced evenly on the rail or ledge with the front trucks on one side and the back trucks on the other side.
- Crooked Lipslide: In this variation of the lipslide, the skateboard is tilted to one side, with either the front trucks or the back trucks higher than the other. This adds a level of difficulty to the trick and requires the skateboarder to maintain their balance on an uneven surface.
- Fakie Lipslide: A fakie lipslide involves approaching the rail or ledge backwards and performing the lipslide in the opposite direction. This requires the skateboarder to have good balance and control while riding backwards.
- One-Foot Lipslide: In this variation, the skateboarder performs the lipslide with only one foot on the board, using the other foot to balance and steer the board. This can be a challenging and advanced variation of the lipslide that requires a lot of balance and coordination.
- Switch Lipslide: A switch lipslide is performed with the skateboarder’s non-dominant foot on the tail of the board. This requires the skateboarder to have good balance and control while riding switch (opposite of their normal stance).
These are just a few examples of the different types of lipslides that skateboarders can perform. As you become more comfortable with the basic lipslide, you can try experimenting with these variations to add some variety and challenge to your skateboarding.
Types of boardslide
There are several different types of boardslides that skateboarders can perform, each with its own set of challenges and techniques. Here are a few common types of boardslides:
- 50-50 Boardslide: This is the most basic type of boardslide, where the skateboard is balanced evenly on the rail or ledge with the back trucks on one side and the front trucks on the other side.
- Crooked Boardslide: In this variation of the boardslide, the skateboard is tilted to one side, with either the back trucks or the front trucks higher than the other. This adds a level of difficulty to the trick and requires the skateboarder to maintain their balance on an uneven surface.
- Fakie Boardslide: A fakie boardslide involves approaching the rail or ledge backwards and performing the boardslide in the opposite direction. This requires the skateboarder to have good balance and control while riding backwards.
- One-Foot Boardslide: In this variation, the skateboarder performs the boardslide with only one foot on the board, using the other foot to balance and steer the board. This can be a challenging and advanced variation of the boardslide that requires a lot of balance and coordination.
- Switch Boardslide: A switch boardslide is performed with the skateboarder’s non-dominant foot on the tail of the board. This requires the skateboarder to have good balance and control while riding switch (opposite of their normal stance).
These are just a few examples of the different types of boardslides that skateboarders can perform. As you become more comfortable with the basic boardslide, you can try experimenting with these variations to add some variety and challenge to your skateboarding.
Lipslide vs boardslide snowboard
Lipslides and boardslides are skateboarding tricks that involve sliding the board along an obstacle, such as a rail or a ledge. These tricks can also be performed on a snowboard, with some slight adjustments to account for the different riding conditions and equipment.
To do a lipslide on a snowboard, the rider approaches the rail or ledge with their back foot on the tail of the board and their front foot on the nose, just like in skateboarding. The rider then uses their weight and balance to lift the back trucks (or bindings) off the ground and onto the rail or ledge, and pushes the board up and over the obstacle with their front foot. The rider then shifts their weight onto their back foot and slides the board along the rail or ledge, using their front foot to balance and steer the board.
To do a boardslide on a snowboard, the rider approaches the rail or ledge with their front foot on the tail of the board and their back foot on the nose, just like in skateboarding. The rider then uses their weight and balance to lift the front trucks (or bindings) off the ground and onto the rail or ledge, and pushes the board up and over the obstacle with their back foot. The rider then shifts their weight onto their front foot and slides the board along the rail or ledge, using their back foot to balance and steer the board.
Both lipslides and boardslides can be challenging tricks to execute on a snowboard, especially for beginner riders. It’s important to practice these tricks slowly and progressively, and to always wear protective gear to minimize the risk of injury. With practice and patience, you can master these tricks and add some variety to your snowboarding repertoire.
Lipslide vs boardslide wakesurf
Lipslides and boardslides are skateboarding tricks that involve sliding the board along an obstacle, such as a rail or a ledge. These tricks can also be performed on a wakesurf board, with some slight adjustments to account for the different riding conditions and equipment.
To do a lipslide on a wakesurf board, the rider approaches the wake with their back foot on the tail of the board and their front foot on the nose, just like in skateboarding. The rider then uses their weight and balance to lift the back trucks (or bindings) off the ground and onto the wake, and pushes the board up and over the obstacle with their front foot. The rider then shifts their weight onto their back foot and slides the board along the wake, using their front foot to balance and steer the board.
To do a boardslide on a wakesurf board, the rider approaches the wake with their front foot on the tail of the board and their back foot on the nose, just like in skateboarding. The rider then uses their weight and balance to lift the front trucks (or bindings) off the ground and onto the wake, and pushes the board up and over the obstacle with their back foot. The rider then shifts their weight onto their front foot and slides the board along the wake, using their back foot to balance and steer the board.
Both lipslides and boardslides can be challenging tricks to execute on a wakesurf board, especially for beginner riders. It’s important to practice these tricks slowly and progressively, and to always wear a personal flotation device to ensure safety while riding on the water. With practice and patience, you can master these tricks and add some variety to your wakesurfing repertoire.
